With the xTool C1 Cutting Machine, you can combine full-color printing and precise cutting in a single workflow. This compact cutting machine brings together an integrated CMYK inkjet printer, a scanner and a blade cutting system. It opens up exciting new possibilities for personalized creative projects – all with just one device!
Whether you're creating colorful stickers, custom labels, heat transfers, greeting cards or creative paper projects, the xTool C1 helps bring your ideas to life by combining several steps into one convenient process.
Print, Scan and Cut – All in One Device
The integrated color printer allows you to print your designs directly with the C1. The built-in scanner then detects the material's position and creates a preview. This lets you position your designs precisely on the material and cut out the desired contours with accuracy.
One particular advantage is that the C1 does not require traditional registration marks for its scanning and cutting workflow. This makes it especially easy to process pre-printed materials and custom designs. You can skip additional preparation steps and bring your projects to life directly with the machine.
Precise Cutting and Creative Drawing
The xTool C1 comes standard with a Fine-Point Blade. It is suitable for precise cutting of common cutting machine materials such as paper and various types of vinyl up to 1 mm (0.04 in) thick.
But the C1 does more than just cut: a pen holder is also included in the standard package, allowing you to insert compatible pens. This enables you to draw designs, create lettering or add personalized messages to greeting cards and invitations, for example. Compatible pens are not included in the standard package and must be purchased separately.
If you want to expand your C1's capabilities, additional tools are available as optional accessories. These include extra cutting blades for different materials and applications, as well as tools for scoring, embossing and hot foil finishing. These accessories are not included in the standard configuration and must be purchased separately.
Even More Creative Possibilities with Optional Accessories
With the right accessories, you can adapt the xTool C1 to different materials and projects. Depending on your application, the following optional upgrades are available:
- Additional Cutting Blades: For a wider range of materials and more demanding cutting tasks, including thicker materials and fabrics such as denim, canvas and polyester felt.
- Scoring Tool: For creating clean fold lines in cards, packaging and other paper projects.
- Embossing Tool: For creating raised or recessed textures and special decorative effects.
- Hot Foil Tool: For adding shiny foil finishes to suitable materials such as cardstock, leather and acrylic.
- Electrostatic Mat: An alternative to conventional adhesive cutting mats, designed for handling particularly thin papers.
- Roll Holder: For continuous feeding of roll materials and processing longer designs.
Please note: The tools and accessories listed above are optional upgrades and are not included in the standard package. They can be purchased separately as needed.
Compact, Versatile and Easy to Connect
Thanks to its compact dimensions, the xTool C1 fits comfortably on smaller work surfaces. When connecting it to your control device, you have two options: the cutting machine can be connected via USB or wirelessly via Wi-Fi.
You can design and control your projects using the free xTool software. The C1 is compatible with PCs, smartphones and tablets, allowing you to prepare your designs directly for printing and cutting.
Key Benefits at a Glance
- Full-color printing, scanning and cutting in one device
- Integrated CMYK inkjet printer
- CIS scanner with 300 or 600 dpi resolution
- Print-then-cut functionality without traditional registration marks
- Fine-Point Blade included as standard
- Draw, write and add lettering directly with the cutting machine
- Optional expansion with additional cutting blades, scoring, embossing and hot foil tools
- USB and Wi-Fi connectivity
- Compatible with PCs, smartphones and tablets
- Free xTool software for design and machine control
- Compact design for your creative workspace
For a comprehensive overview of the xTool C1 and all its features, visit our INFO PAGE (DE).

General
- Brand: xTool
- Model: C1 Cutting Machine
- Device Type: Cutting machine with integrated color printer and scanner
- Dimensions (W x D x H): 578 x 183 x 178 mm (22.76 x 7.20 x 7.01 in)
- Weight: 7.86 kg (17.33 lb)
- Connectivity: USB / Wi-Fi
- Compatible Devices: PC, smartphone, tablet
- Power Supply: 100-240 V AC, 50/60 Hz, 50 W
Working Area
- With Standard Mat: 30.48 x 30.48 cm (12 x 12 in)
- With Large Cutting Mat: 30.48 x 60.96 cm (12 x 24 in)
- With Electrostatic Mat: 30.48 x 30.48 cm (12 x 12 in)
- Without Cutting Mat (Roll Materials): 27.9 cm (10.98 in) wide x 3.6 m (11.81 ft) long with the Roll Holder
Performance
- Maximum Cutting Speed: 509 mm/s (20.04 in/s)
- Maximum Material Thickness:
- On Adhesive Cutting Mat: Up to 3 mm (0.12 in), depending on the blade:
- Up to 1 mm (0.04 in) with the Fine-Point Blade
- Up to 1.6 mm (0.063 in) with the Deep-Cut Blade
- Up to 3 mm (0.12 in) with the Cutting Blade
- On Electrostatic Mat: Up to 1.7 mm (0.067 in)
- Printing Speed (Single Pass): 352 mm/s (13.86 in/s)
- Printing Technology: Thermal inkjet printing, 4-color ink cartridge (CMYK)
- Automatic Ink Monitoring: The cutting machine automatically monitors ink levels:
- When black ink runs out: You can continue printing with the remaining colors. Color accuracy may vary slightly.
- When cyan, magenta or yellow (C/M/Y) runs out: The cartridge must be replaced to ensure correct printing.
- Ink Type: Water-based pigment ink (DURA)
- Ink Cartridge Capacity: 40 ml total (10 ml per color)
- Maximum Print Resolution: 720 x 1,200 dpi
- Maximum Printable Material Thickness: 3 mm (0.12 in)
- Print and Cut Accuracy: ≤ 0.35 mm (≤ 0.014 in)
- Scanning Technology: Contact Image Sensor (CIS) with real-time preview
- Scanning Resolution: 300 / 600 dpi
- 1x xTool C1 Cutting Machine
- 1x Fine-Point Blade
- 1x Power Cable
- 1x USB Cable
- 1x Pen Holder
- 1x CMYK Ink Cartridge
- 1x Light Tack Cutting Mat, 30.48 x 30.48 cm (12 x 12 in)
- 12x Moisture Pads
- 3x Calibration Sheets
- 1x Starter Material Pack:
- 1x Printable Glitter Sticker Paper
- 1x Printable Glossy Waterproof Sticker Paper
- 1x Printable Transparent Holographic Sticker Paper
- 1x Printable Heat Transfer Paper for Dark Fabrics
- 1x Transfer Tape
- 1x Quick Start Guide
- 1x Safety Instructions
Not included in the standard package: Additional cutting blades, scoring and embossing tools, Hot Foil Tool, Roll Holder and Electrostatic Mat. These accessories are available separately.
Premium Technical Support at hobbyplotter.deWe’re here to help you even after your purchase.
- 30 days of free telephone support following purchase.
0 60 33 / 74 46 89 (Please have your customer number to hand.)
- Priority handling of enquiries via support form.
- Technically trained specialist staff.
- Our own workshop for servicing.
- Hassle-free warranty** processing within Germany.
- Warranty period: 24 months.
Your benefits at hobbyplotter.de
- Fast dispatch from Germany for prompt delivery.
- Alternatively, you can collect your order directly from our warehouse in Butzbach.
- Unpack, plug in and get started – our devices arrive pre-assembled.
- When you purchase a device, you receive free access to our download area.*
- For laser cutters and UV printers, we offer demonstrations on-site or via video conference.
- Visit our blog (DE) and be inspired.
*Registration at
https://download.hobbyplotter.de is required to access our download area.
As a registered user, you’ll have access to a range of content, such as a wide variety of ready-made designs, documentation and instructions in German, as well as software and driver downloads.

The Makeblock success story began in 2012 when Jasen Wang, the founder and CEO, had a groundbreaking idea. As a passionate maker, Jasen realised how difficult it can be to turn a creative idea into reality. This drive gave rise to his first project: Makeblock.
Makeblock specialises in promoting STEAM education. The company helps young students develop their creativity by developing educational infrastructure - including robotics modules, coding software and laser cutters. The aim is to give pupils the tools to learn technical knowledge and creative skills through play.
At the end of 2020, Makeblock expanded its portfolio and entered the field of laser machines. With the xTool project, the product range was expanded so that not only students but also adults can benefit from the solutions. Creativity is not just about developing programming robots - it is also about personalising everyday objects, such as engraving names on mugs or creating works of art from wood.
With the launch of the first product, the xTool D1 in 2021, Jasen started a new chapter in his vision. While the Makeblock success story continues, xTool marks the start of an exciting new episode.
Contact:
MAKEBLOCK (HONG KONG) COMPANY LIMITED
19H Maxgrand plaza No.3 Tai Yau Street
San Po Kong, Kowloon, Hong Kong
European subsidiary
Makeblock Europe BV
Oostergracht 48, 3763 LZ Soest, Niederlande
Phone: +31 6 1264 5740
EMail: eu@makeblock.com
Register entries:
Registered with the Dutch Chamber of Commerce (KvK): 68916752
VAT no.: NL857646655B01